Commercial · Fort Myers, FL
Cracks along control joints are usually a failed stucco expansion joint, not just bad paint. Superior Stucco Fort Myers has served Fort Myers since 2016, repairing and replacing joints to stop leaks, control movement, and protect your finish.
We start with a close inspection of the joint layout, existing sealant, and any rusted lath or corner bead at the break. Loose stucco is cut back to sound material with a grinder and diamond blade, then the substrate is checked for delamination and moisture intrusion. We prep the joint correctly by cleaning to bare, solid edges, setting bond breaker where required, and installing the right backer rod depth so the sealant forms an hourglass profile instead of a flat smear. If the system needs it, we patch the base with polymer-modified cement, replace damaged galvanized lath, and re-tape transitions so movement stays in the joint.
Southwest Florida heat, humidity, and wind-driven rain make joint performance non-negotiable, especially on long wall runs, parapets, and around openings. We use exterior-rated elastomeric sealants that stay flexible, tool the bead for proper wetting, and protect adjacent stucco with clean mask lines so the repair does not telegraph through the finish. After cure, we blend textures like sand float, skip trowel, dash, or smooth acrylic to match the existing elevation, then prime and paint as needed to keep water from tracking behind the coating. When we find repeated cracking, we verify joint spacing and termination so the wall can expand and contract without tearing the field stucco.
Fort Myers customers choose us because we repair the cause, not just the crack. You get clear scope, photos of what we found, and a written plan for joint replacement, patching, and finish blending, with options based on budget and the condition of the wall. Our crews work clean, protect landscaping and windows, and keep dust controlled during grinding and removal. We are licensed and insured, and we follow manufacturer instructions for sealant tooling, backer rod sizing, and cure times so the joint performs season after season.
At the end, we walk the project with you and point out each repaired stucco expansion joint, the sealant profile, and any areas we recommend monitoring. You receive a free written estimate up front, then a straightforward schedule and a punch-list check before we demobilize. We also document product types used (backer rod size, sealant family, patch materials) so future maintenance is simple and consistent. If the wall shows signs of moisture issues, we can discuss next steps like targeted stucco repairs, re-caulking at windows, or coating upgrades to keep the assembly dry.
Yes. We provide a free written estimate after an on-site inspection so the scope, materials, and timeline are clear.
Small crack and patch repairs can often be completed in a day, while re-stucco and multi-elevation projects take longer due to prep, cure time, and finish coats. We provide a schedule with the estimate.
Yes. We trace likely entry points, repair damaged stucco and transitions, and address common failure areas like sealant joints, penetrations, and flashing details.
Yes. We handle commercial stucco repairs, repainting, and phased exterior work for property managers, HOAs, and multi-family buildings.
Yes, when requested. We prep and prime as needed, then apply the specified exterior coating so repaired areas blend and the finish is protected.
A stucco expansion joint is designed to absorb building movement, but when the joint sealant fails, cracks open up, water gets in, and the surrounding stucco starts to break down. Expansion joint problems often show up as straight-line cracking, separation at dissimilar materials, or recurring splits that come back after a simple skim coat. Superior Stucco Fort Myers focuses on the joint assembly itself so the wall can move without tearing the finish.
Not every crack is a true expansion joint issue, so we verify what you have: control joints, expansion joints, cold joints, and transitions at windows, doors, and soffits. Then we check the surrounding stucco for hollow spots, loose areas, and staining that can indicate water intrusion. If prior repairs used the wrong material, like hard mortar packed into a movement joint, we remove it so the joint can flex again. Getting the geometry right matters, including proper joint width, bond breaker placement, and the right backer rod size so the sealant adheres to two sides, not three.
Our repair process is built around long-term performance. We clean and prep the joint faces, repair damaged base coat where needed using polymer-modified cement materials, and replace compromised lath or corner bead when it is causing cracks to mirror through the finish. After the sealant cures, we blend the surrounding texture and coatings so the repair looks intentional, not patched. For properties with frequent movement or recurring failures, we can recommend improved joint placement or additional jointing where long runs are cracking repeatedly.
If you are seeing splitting, gaps, or water staining along a stucco expansion joint, it is best to address it before moisture migrates behind the wall. We provide a free written estimate and explain what we found, what we will remove, what we will rebuild, and how we will match the finish. Call today to schedule an on-site evaluation and get a clear plan to protect your stucco system.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Fort Myers. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
