Residential · Fort Myers, FL
When stucco starts cracking, bulging, or letting water in, patching the surface rarely solves the real problem. Superior Stucco Fort Myers has served Fort Myers since 2016, providing stucco remediation that removes failed material, corrects moisture paths, and rebuilds the wall system correctly.
Stucco remediation starts with controlled demolition and proper prep, not a skim coat. We remove loose or delaminated stucco back to sound substrate, then address the assembly under it, including wood sheathing, CMU block, framing, fasteners, and corrosion. We rebuild with code-appropriate layers such as water-resistive barrier (WRB), proper flashing at transitions, and self-adhered membrane where needed, then install galvanized or stainless lath with correct fastener spacing before scratch and brown coats go on. Mixes are proportioned for Florida conditions, and we allow cure time so the base is stable before finish work.
Southwest Florida’s heat, wind-driven rain, and high humidity punish weak details around windows, doors, roof lines, and penetrations. During stucco remediation we correct common failure points like missing kickout flashing, compromised weep screeds, poorly sealed dissimilar-material joints, and unsealed pipe and conduit penetrations. After the base coats, we match and blend finishes such as sand float, lace, dash, and smooth trowel, and we can apply an acrylic finish coat or a high-build elastomeric coating when the project calls for added water shedding. Color matching is handled with test panels so repaired areas do not telegraph through the final finish.
Fort Myers customers choose us because we treat remediation like a building-envelope repair, not cosmetic patchwork. Our crew is licensed and insured, and we show up with the right equipment to do clean work, including dust control, scaffolding where required, and moisture-spotting tools to help locate affected areas. You get straightforward options, from targeted removal and rebuild to larger sectional remediation, with clear scope and a written estimate. We coordinate with painters, window installers, and roofers when sequencing matters so the wall system is tied together correctly.
Before we call the job complete, we walk the project with you to confirm edges, terminations, texture blend, and caulk lines at control joints and transitions. You receive a documented scope, the repair locations, the materials used (WRB type, lath, base coats, finish system), and care guidance for curing and repaint windows. We clean up daily, protect landscaping and hardscapes, and make sure weep paths and drainage details are left open and functional. If you are selling, buying, or dealing with recurring leaks, we can support your next steps by explaining what was repaired and why it was failing.
Yes. We provide a free written estimate after an on-site inspection so the scope, materials, and timeline are clear.
Small crack and patch repairs can often be completed in a day, while re-stucco and multi-elevation projects take longer due to prep, cure time, and finish coats. We provide a schedule with the estimate.
Yes. We trace likely entry points, repair damaged stucco and transitions, and address common failure areas like sealant joints, penetrations, and flashing details.
Yes. We handle commercial stucco repairs, repainting, and phased exterior work for property managers, HOAs, and multi-family buildings.
Yes, when requested. We prep and prime as needed, then apply the specified exterior coating so repaired areas blend and the finish is protected.
Stucco remediation is the process of removing failed stucco and rebuilding the wall assembly so moisture cannot keep getting trapped behind the finish. In Fort Myers, we see damage caused by wind-driven rain, thermal movement, and poor flashing at windows, doors, and roof-to-wall intersections. Superior Stucco Fort Myers focuses on correcting the cause first, then restoring the stucco to a clean, consistent finish.
Many “repairs” fail because they only fill cracks with caulk or patch over hollow areas. True stucco remediation involves opening the wall where it has separated or where water has migrated, then rebuilding the layers in the right order: drainage and water management first, then lath and base coats, then the finish. If flashing or sealant joints are wrong, we address those details so the repair does not become a repeat service call.
Our remediation process is designed for both residential and commercial buildings, including stucco over CMU block and framed construction. We pay close attention to terminations, penetrations, and movement joints because that is where leaks start. Where appropriate, we blend into existing work so the repair is hard to spot, and we can coordinate final painting after proper curing.
If you are seeing step cracks, staining, soft spots, efflorescence, or bubbling paint, schedule an evaluation. We will explain what is happening behind the wall, recommend the right level of remediation, and provide a free written estimate so you can make a confident decision.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Fort Myers. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
